Metal scratch remover11/5/2023 Once you are happy with the results, wipe away the excess oil with a clean cloth.īy following these methods, your stainless steel appliances will be sleek and shiny for years to come!.Always follow the direction of the grain.Rub against the scratch in one direction only – going back and forth or in a circular motion can cause further damage.Using moderate, firm pressure, buff the pad against the scratched surface as follows:.Apply a little bit of olive oil to the pad.If you tried the above tactics on your appliance and the deeper scratches simply won’t go away, you’ll need to kick things up a notch with an abrasive pad, such as a scouring pad or scrubbing sponge. Once satisfied, wipe the surface with a dry cloth. After rubbing continuously for a few minutes, wipe the compound off with a new, damp cloth.Take a lint-free cloth and dab a small amount of the compound or toothpaste, then rub it into the scratch, following the direction of the grain.Thoroughly clean the appliance’s surface to remove any dirt or dust.If you don’t have a compound, white toothpaste can be used as-is, or try mixing baking soda with a little bit of water until you achieve a paste consistency. Be sure to follow the instructions for your specific compound before proceeding. Your scratch remover compound may have come in a paste form, or it may be a powder that will need to be mixed with water to form a paste. If your appliance has deeper scratches, you will also need the following: Non-abrasive, stainless steel scratch remover compound (in a pinch, white toothpaste or baking soda can be used instead). For smaller nicks and dings, you will need: Now that you have confirmed your appliance is truly stainless steel, you will need to assess the scratches to determine what materials you will need.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |